Rollforming machine for automatic production of trapezoidal and similar profiles with the height up to 160 mm.

According to the requirements of a respective profile there can be used the coil width up to 1.500 mm.

This equipment is optionally available as: 

  • a pre-cut line (the sheet will be cut to the required length before being profiled)
  • an after-cut line (the ready profile will be cut by the Flying-Shearing machine to the required length after the profiling process)

Furthermore it can be chosen between: 

  • single-type line (for one profile type only)
  • multi- (cassette-) type line (for production of different profile types replacing cassettes with different roll-forming units)

HIGH SPEED Rollforming machine

Technical Specifications

Machine Specs
Profile type
trapezodial (and similar) up to 160 mm height
Profile lenght
up to 24.000 mm
Sheet thickness
0.5–1.5 mm steel
Primary material
steel coils, up to 1.500 mm wide, max. 15 t
Max. speed
0–60 m/min, infinitely adjustable
Control system
PLC with operating panel